HomeAboutIndustrialCNCLinksForumCopyrightContact
     

Router Plans
Lathe Plans
Wire Plans
Control Software
Linear Bearings
Drives
Rotary Tools

Kits
Artwork
CNC Guide
Gallery
Forum


 

 

 Copyright © 2008 by Rockcliff Machine Inc.  No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. All trademarks are trademarks of their respective owners. For more information, please contact rockcliff@rogers.com

TERMS OF USE

This is a copyrighted work and , Rockcliff Machine Inc (ROCKCLIFF) and its licensors reserve all rights in and to the work. Use of this work is subject to these terms. Except as permitted under the Copyright Act and the right to store and retrieve one copy of the work, you may not decompile, disassemble, reverse engineer, reproduce, modify, create derivative works based upon, transmit, distribute, disseminate, sell, publish or sublicense the work or any part of it without Rockcliff’s prior consent. You may use the work for your own noncommercial and personal use; any other use of the work is strictly prohibited. Your right to use the work may be terminated if you fail to comply with these terms.

THE WORK IS PROVIDED “AS IS”. ROCKCLIFF MACHINE INC. AND ITS LICENSORS MAKE NO GUARANTEES OR WARRANTIES AS TO THE ACCURACY, ADEQUACY OR COMPLETENESS OF OR RESULTS TO BE OBTAINED FROM USING THE WORK, INCLUDING ANY INFORMATION THAT CAN BE ACCESSED THROUGH THE WORK VIA HYPERLINK OR OTHERWISE, AND EXPRESSLY DISCLAIM ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Rockcliff Machine Inc. and its licensors do not warrant or guarantee that the functions contained in the work will meet your requirements or that its operation will be uninterrupted or error free. Neither Rockcliff nor its licensors shall be liable to you or anyone else for any inaccuracy, error or omission, regardless of cause, in the work or for any damages resulting there from. Rockcliff has no responsibility for the content of any information accessed through the work. Under no circumstances shall Rockcliff and/or its licensors be liable for any indirect, incidental, special, punitive, consequential or similar damages that result from the use of or inability to use the work, even if any of them has been advised of the possibility of such damages. This limitation of liability shall apply to any claim or cause whatsoever whether such claim or cause arises in contract, tort or otherwise.

Building your machine or device using plans from Rockcliff Machine Inc., you must agree to the following conditions: 1.  You agree that you are solely responsible for the machine that you construct using our plans.  This includes the operation, safety, and reliability of the machine. 2.  You agree to be fully responsible for any mistakes, errors, material loss, personal damage, secondary damages, caused by any circumstances relating to the use of the machine you construct using these plans. 3.  You accept full liability for the operation and use, of the machine you construct, by others who may use the machine.  The onus is on you to caution others who may operate the machine, and agree to compensate Rockcliff Machine Inc. for any losses due to legal action brought against us by others who have operated your machine. 4.  You fully accept the above statements and will comply, at all times, with standard operating procedures. 5. our plans to build any machine are to be used solely for personal or business use and is not to be used for resale in any form 6. all drawings, pictures, designs, are  copy written and are the intellectual property of rockcliff machine inc. and are not to be reproduced.

AS WITH ANY MACHINE AND FABRICATION THERE IS NO MORE IMPORTANT RULE THAN SAFETY  FOLLOW ALL SAFETY RULES FOR THE MANUFACTURE OF THIS MACHINE AND FOLLOW ALL SAFETY RULES WHEN USING THIS MACHINE.  ROCKCLIFF MACHINE INC. WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGES, LIABILITIES OR INJURIES RELATED TO BUILDING THIS MACHINE, THE USE OF THIS MACHINE, AND TO ANY PARTS THAT THIS MACHINE CAN PRODUCE. THE CONSTRUCTION AND USE OF THIS  MACHINE CAN CAUSE SERIOUS INJURY , IT'S UP TO YOU TO BUILD IT AND USE IT SAFELY AND RESPONSIBLY 

 

I agree with the terms and conditions    Download CNC Router Plans

      
   
         
           
                          Copyright © 1982-2008 Rockcliff Machine Inc. All rights reserved