High Performance Motor Control            

 Soon to be released. . . .            

 Viper Series Pro Motor Drive Bipolar 4 Axis Micro Stepper Motor PWM Control. 

Finally, a cnc control system in one package, that will run any combination of Nema 17, 23, or 34 stepper motors in full,-1/2-1/4-1/8 step modes, with true output capability up to 2.5 amps per axis. Built with the latest SMT stepper motor driver chip technology. it incorporates PWM and auto PFD , to achieve the muscle to deliver higher speeds with increased step accuracy and reduced power dissipation. Your machine and motors will reliably run faster, while your driver and motors will stay cooler.

With professional electronics engineering,  it's been designed the way it should be - with only the features that count.' And, at the same time eliminating what was wrong with today's cnc stepper controls. 

Bipolar 4X Axis Micro Stepper Motor PWM Control
Resolution FULL 1/2 1/4 1/8 Step Mode
2.5AMP  Per Axis Adjustable Onboard Motor Current Control
Auto PFD Control
4 ,6 or 8 WIRE NEMA Motor Frame 17, 23, 34 Compatible
Integrated DB25 Breakout  
OPTO-Isolated
SMT Components
ROHS Compliant
Artsoft Mach3 , Turbocnc, EMC KellyWare Compatible

Bipolar 4X Axis Micro Stepper Motor PWM Control Our Bipolar Motor Drives are by far preferred by most for best overall performance and compatibility, and with Pulsed Width Modulation Technology with give superior motor performance while running, and stay cooler while idle.  

Resolution FULL 1/2 1/4 1/8 Step Mode  On board switches enables any individual  axis's to be easily  set to any step resolution                                                                

2.5AMP  Adjustable On-Board Motor Current Control  Any combination of motor size can be used, so if you only need a small motor on one and a larger motor on a different axis, the current can be set to match exactly what motor size your using

Auto PFD Control   Automatically adjusts the Percent Fast Decay on the fly

4 ,6 or 8 WIRE NEMA Motor Frame 17, 23, 34 Compatible   The features with using a bipolar drive is that 4, 6, or 8 wire stepper motors can be used, in any combination

Integrated DB25 Breakout  Board    We  completely removed the need for a separate breakout board, this total elimination  of a separate breakout board design replaces on average 75 to 100  non permanent connection points, with a  permanent soldered connection, a non permanent connection will always lead to a loose connection,  that will fail, and / or worst destroy the electronics,  separate breakout boards are the main culprit in 90% of drive failures, so we integrated it with permanent connections..

Integrated I/O   Screw terminals for limit, home and any external device you want to connect

Integrated  xyza axis e-stop inputs  XYZA axis's have their own dedicated e-stop or disable / enable

OPTO-Isolated   We opto-isolated the board to protect your pc-parallel port

SMT Components    Surface Mount Technology provides low cost small foot print

ROHS Compliant      

Mach3 , EMC, Turbocnc, EMC KellyWare,  Compatible Let face it the choice's are slim when it comes to PC Based CNC motion control software,  so rest assured these driver boards are compatible with the most popular software control systems