How to.....

Cutting 3D .stl files 

Cutting single point threads on a router

Limit switch use and setup

Copy existing models

This highly detailed Taurus was cut using a Vectorclip3D STL file on a Rockcliff base model router using Mach3 control in one single pass, the engraving is approximately 4" x 4" and is a 1/4" deep, we used Meshcam to produce the gcode .

The VectorClip .stl file is loaded into a CAM program we like MeshCam for .stl files because it's very powerful easy to features can generate gcode very fast